lead-free parts pb surface mount tape and reel ligitek electronics co.,ltd. property of ligitek only data sheet lsbk9033/tr2 doc. no : qw0905-lsbk 9033/tr2 rev. : a date : 29 - sep - 2005
r 1.55 0.3 6.43 1.75 3.05 9.3 4.0 120.3 2.0 4.0 5.5 ligitek electronics co.,ltd. property of ligitek only page 1/7 cathode r 1.9 2.0 0.50.1 2.8 part no. lsbk9033/tr2 package dimensions 0.40.1 0.7 carrier type dimensions polarity 5.8 ? 0.5 3.05 ? 0.5 4.3 ? 0.5 1.4 note : 1.all dimension are in millimeter tolerance is ? 0.2mm unless otherwise noted. 2.specifications are subject to change without notice. note : the tolerances unless mentioned is ? 0.2mm,angle ? 0.5. unit=mm. 2.5
ligitek electronics co.,ltd. property of ligitek only 2/7 page part no. lsbk9033/tr2 reel dimensions 16.0 ? 1.0 74.0 ? 1.5 14.2 ? 1.0 1500 devices quantity/reel 12.0mm tape,7"reel description lsbk9033/tr2 part no. r 178 ? 2.0
part no. lsbk9033/tr2 3/7 page unit ma ma mw g a sbk ratings symbol 30 100 120 50 i f i fp pd ir parameter reverse current @5v power dissipation peak forward current duty 1/10@10khz forward current absolute maximum ratings at ta=25 j ligitek electronics co.,ltd. property of ligitek only j j viewing angle 2 c 1/2 (deg) 220 20 typ. -20 ~ +80 -30 ~ +100 t opr tsol tstg soldering temperature storage temperature operating temperature typical electrical & optical characteristics (ta=25 j ) spectral halfwidth ??f nm forward voltage @20 ma(v) 4.2 26 3.5 max. typ. peak wave length f pnm 470 468 lens dominant wave length f dnm material blue ingan/sic emitted part no lsbk9033/tr2 note : 1.the forward voltage data did not including ? 0.1v testing tolerance. 2. the luminous intensity data did not including ? 15% testing tolerance. water clear color max 260 j for 5 sec max (2mm from body) 120 min. luminous intensity @20ma(mcd) 500 electrostatic discharge esd v
forward current(ma) forward voltage(v) 380 fig.4 relative intensity vs. wavelength ambient temperature( j ) fig.3 forward current vs. temperature forward current@20ma 0 025 10 20 30 40 relative intensity@20ma 50 75 0 100 0.5 1.0 530 wavelength (nm) 430 480 480 680 630 580 0.5 0 0.25 ligitek electronics co.,ltd. property of ligitek only fig.2 relative intensity vs. forward current typical electro-optical characteristics curve sbk9033/tr2 part no. l fig.1 forward current vs. forward voltage forward current(ma) 10 0 1 5 2 20 15 25 sbk chip 30 1.5 3 4 relative intensity normalize @20ma 5 1.0 0.75 1.25 4/7 page 05 10 15 25 20 30
part no. lsbk9033/tr2 page 5/7 ligitek electronics co.,ltd. property of ligitek only 245 ? 5 j within 5 sec soldering heat max. 260 j cooling -5 j /sec time 5sec 260 c max. 10sec.max 1~5 c/sec preheat 180~200 c above 220c 60 sec.max. 2. wave solder 120 ~ 150 j temp. ( j ) preheat 240 3-1. lead reflow solder 120 1~5 c/sec 3-2 pb-free reflow solder 150 reflow soldering should not be done more than two times. 120 sec.max. 60 ~ 120 sec rising +5 j /sec preheat 120 ~ 180 sec recommended soldering conditions 1. hand solder basic spec is ?? 280 j 3 sec one time only.
part no. lsbk9033/tr2 6/7 page ligitek electronics co.,ltd. property of ligitek only circuit model b precautions for use: storage time: 1.the operation of temperatures and rh are : 5 j ~35 j ,rh60%. 2.once the package is opened, the products s hould be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our pr oducts within a year(from production date). 3.if opened more than one week in an atmos phere 5 j ~ 35 j ,rh60%, they should be treated at 60 j? 5 j fo r 15hrs. drive method: led is a current operated device, and therefore, require r some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forwrd current should not be allowed to c hange by more than 40 % of its desired value. circuit model a led led esd(electrostatic discharge): static electricity or power surge will damage the led. use of a c onductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. (a) recommended circuit. (b) the difference of brightness between led could be f ound due to the vf-if characteristics of led. cleaning: use alcohol-based cleaning solvents such as isopropyl alc ohol to clean the led.
part no. lsbk9033/tr2 7/7 reference standard test condition test item reliability test: classification 1.ta=105 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=-40 j? 5 j 2.t=1000 hrs (-24hrs, + 72hrs) 1.ta=65 j? 5 j 2.rh=90 %~95% 3.t=1000hrs ? 2hrs 1.ta=105 j? 5 j &-40 j? 5 j (10min) (10min) 2.total 10 cycles operating life test low temperature storage test high temperature storage test endurance test high temperature high humidity storage test thermal shock test 1.ta=under room temperature as per data sheet maximum rating. 2.if=20ma 3.t=1000 hrs (-24hrs, + 72hrs) ligitek electronics co.,ltd. property of ligitek only page mil-std-883d:1008 jis c 7021: b-10 mil-std-750d: 1026 mil-std-883d: 1005 jis c 7021: b-1 mil-std-202f:103b jis c 7021: b-11 jis c 7021: b-12 mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1011 1.t=260 c max. 10sec.max. 2. 6 min 1.105 j ~ 25 j ~ - 55 j ~ 25 j 30mins 5mins 30mins 5mins 2.10 cyeles temperature cycling ir reflow environmental test mil-std-202f: 107d mil-std-750d: 1051 mil-std-883d: 1010 jis c 7021: a-4 mil-std-750d:2031.2 j-std-020 mil-std-202f: 208d mil-std-750d: 2026 mil-std-883d: 2003 iec 68 part 2-20 jis c 7021: a-2 solderability test 1.t.sol=235 j? 5 j 2.immersion time 2 ? 0.5sec 3.coverage ? 95% of the dipped surface
|
